edgeboard connectors, dual r eadout, 0.100" (2.54 mm) c-c, standard and right angle terminals www.vishay.com for technical questions, contact: connectors@vishay.com document number: 36001 2 revision: 16-feb-09 eb4 vishay dale electrical specifications current rating: 3 a test voltage between contacts: at sea level: 650 v rms at 70 000 feet (21 336 meters): 275 v rms insulation resistance: 5000 m minimum at 500 v dc potential contact resistance: 30 mv maximum at rated current (with gold plating) operating temperature: - 65 c to + 125 c humidity: 96 h at 90 % relative humidity at + 40 c, dried at room temperature for 3 h minimum, insulation resistance was greater than 5000 m durability: after 500 cycles of inse rtion and withdrawal of a 0.070" (1.78 mm) thick steel test board, contact resistance less than 0.030 v at 3 a on gold plated contacts and individual contact pair separation force when measured with a 0.054" (1.37 mm) thick steel test blade was greater than ? oz. shock: three 50g shocks in each of 3 mutually perpendicular planes with no loss of continuity vibration: 2 h in each of 3 mutually perpendicular planes, frequency sweep 10 cps to 55 cps at 0.06 double amplitude with no loss of continuity features ? grid patterns: 0.100" c-c x 0.150" (2.54 mm x 3.81 mm) and 0.100" c-c x 0.200" (2.54 mm x 5.08 mm) ? standard and right angle terminals ? greater design latitude: 4 body materials: diallyl phthalate, phenolic, glass-filled polyester and glass-filled polyphenylene sulfied 7 contact termination styles - 3 standard, 4 right angle 20 body sizes and 6 mounting styles ? selective gold plating ? accepts pc board thickness of 0.054" to 0.071" (1.37 mm to 1.80 mm) ? polarization between contact positions in all sizes. between contact polarization permits polarizing without loss of contact position. ? recognized under the component program of underwriters laboratories, inc. listed under file e65524, project 77ch3889 applications for use with 0.0625" (1.59 mm) printed circuit boards requiring an edgeboard type connector on 0.100" (2.54 mm) centers material specifications body material: ?1? glass-filled diallyl phthalate per mil-m-14, type sdg-f green, flame retardant (ul 94 v-0) ?2? glass-filled phenolic per mil-m-14, type mfh dark green, flame retardant (ul 94 v-0) ?3? thermoplastic polyester, glass-filled, black, flame retardant (ul 94 v-0) ?5? thermoplastic polyphenylene sulfied, glass filled, brown, flame retardant (ul 94 v-0) contacts: phosphor bronze (see ordering information) polarizing key: glass reinforced nylon, flame retardant (ul 94h-b) plating: gold (see ordering information) ordering information eb4 3 k 20 sg x 15 model body material 1 = diallyl phthalate 2 = phenolic 3 = glass-filled polyester 5 = glass-filled polyphenylene sulfied standard terminal variations c, d, k, 1r, 2r, 3r, 4r contacts per side 6, 10, 12, 15, 18, 20, 22, 25, 28, 30, 31, 35, 36, 40, 43, 44, 48, 49, 50, 60, and 65 contact plating sg = selective gold plating (0.00003" (0.000762 mm) minimum th ick) on contact area with gold flash on terminal. sgf = selective gold plating (0.000010" (0.000254 mm) minimum th ick) on contact area with gold flash on terminal. all gold plating over 0.00005" (0.00127 mm) minimum nickel underplate. contact factory for additional plating options. mounting variations polarizing key positions key(s) are located to right of position(s) designated. use odd- numbered contact for ordering: -1, -3, -5, etc. required only when polarizing keys are to be factory installed. note: to order polarizing keys individually, specify model pk-4.
document number: 36001 for technical questions, contact: connectors@vishay.com www.vishay.com revision: 16-feb-09 3 eb4 edgeboard connectors, dual read out, 0.100" (2.54 mm) c-c, standard and right angle terminals vishay dale dimensions in inches (millimeters) polarizing key: when ordering polariz ing keys individually, specify by the model number: pk-4 between contacts. hand insertion tool, tpk-4, provided upon request. # of contact positions per side abcde 6 1.435 (36.45) 1.175 (29.85) 0.700 (17.78) 0.860 (21.84) 0.750 (19.05) 10 1.835 (46.61) 1.575 (40.00) 1.100 (27.94) 1.260 (32.00) 1.150 (29.21) 12 2.035 (51.69) 1.775 (45.08) 1.300 (33.02) 1.460 (37.08) 1.350 (34.29) 15 2.335 (59.31) 2.075 (52.70) 1.600 (40.64) 1.760 (44.70) 1.650 (41.91) 18 2.635 (66.93) 2.375 (60.32) 1.900 (48.26) 2.060 (52.32) 1.950 (49.53) 20 2.835 (72.01) 2.575 (65.40) 2.100 (53.34) 2.260 (57.40) 2.150 (54.61) 22 3.035 (77.09) 2.775 (70.48) 2.300 (58.42) 2.460 (62.48) 2.350 (59.69) 25 3.335 (84.71) 3.075 (78.10) 2.600 (66.04) 2.760 (70.10) 2.650 (67.31) 28 3.635 (92.33) 3.375 (85.72) 2.900 (73.66) 3.060 (77.72) 2.950 (74.93) 30 3.835 (97.41) 3.575 (90.80) 3.100 (78.74) 3.260 (82.80) 3.150 (80.01) 31 3.935 (99.95) 3.675 (93.34) 3.200 (81.28) 3.360 (85.34) 3.250 (82.55) 35 4.335 (110.11) 4.075 (103.50) 3.600 (91.44) 3.760 (95.50) 3.650 (92.71) 36 4.435 (112.65) 4.175 (106.04) 3.700 (93.98) 3.860 (98.04) 3.750 (95.25) 40 4.835 (122.81) 4.575 (116.20) 4.100 (104.14) 4.260 (108.20) 4.150 (105.41) 43 5.135 (130.43) 4.875 (123.82) 4.400 (111.76) 4.560 (115.82) 4.450 (113.03) 44 5.235 (132.97) 4.975 (126.36) 4.500 (114.30) 4.660 (118.36) 4.550 (115.57) 48 5.635 (143.13) 5.375 (136.52) 4.900 (124.46) 5.060 (128.52) 4.950 (125.73) 49 5.735 (145.67) 5.475 (139.06) 5.000 (127.00) 5.160 (131.06) 5.050 (128.27) 50 5.835 (148.21) 5.575 (141.60) 5.100 (129.54) 5.260 (133.60) 5.150 (130.81) 60 6.835 (173.61) 6.575 (167.00) 6.100 (154.94) 6.260 (159.00) 6.150 (156.21) 65 7.335 (186.31) 7.075 (179.70) 6.600 (167.64) 6.760 (171.70) 6.650 (168.91) 0.2 8 7 (7.29) e d see table for contact and mountin g variations 0.250 (6.35) typ. 0.430 (10.92) typ. 0.610 (15.49) typ. 0.1 8 0 (4.57) typ. 0.060 (1.52) typ. 0.050 (1.27) typ. 0.342 ( 8 .69) typ. 0.365 (9.27) a b c j j 0.060 (1.52) r typ. 0.100 (2.54) typ. 0.200 (5.0 8 ) 0.300 (7.62) depth of insertion 0.054 - 0.071 (1.37 - 1. 8 0) card thickness section j - j 0.125 (3.17) point of contact 0.031 (0.7 8 7) 0.295 (7.49) 0.150 (3. 8 1) 0.096 0.002 (2.44 0.051)
www.vishay.com for technical questions, contact: connectors@vishay.com document number: 36001 4 revision: 16-feb-09 eb4 vishay dale edgeboard connectors, d ual readout, 0.100" (2.54 mm) c-c, standard and right angle terminals physical specifications contact type: bifurcated cantilever beam number of contacts: 10, 12, 15, 18, 20, 22, 25, 28, 30, 31, 35, 36, 40, 43, 44, 48, 49, 50, 60 and 65 per side contact terminal variation: standard terminals type ?c? - dip solder, 0.025" (0.635 mm) square terminals, 0.175" (4.44 mm) nominal terminal length below standoffs type ?d? - dip solder, 0.025" (0.635 mm) square terminals, 0.115" (2.92 mm) nominal terminal length below standoffs type ?k? - wire wrap?, 0.025" (0.635 mm) square terminals, 0.570" (14.48 mm) nominal terminal length below standoffs contact terminal variation: right angle terminals type ?1r? - dip solder, 0.025" (0.635 mm) square terminals, 0.120" (3.05 mm) nominal terminal length x 0.150" (3.81 mm) nominal terminal row spacing type ?2r? - dip solder, 0.025" (0.635 mm) square terminals, 0.120" (3.05 mm) nominal terminal length x 0.200" (5.08 mm) nominal terminal row spacing type ?3r? - dip solder, 0.025" (0.635 mm) square terminals, 0.180" (4.57 mm) nominal terminal length x 0.150" (3.81 mm) nominal terminal row spacing type ?4r? - dip solder, 0.025" (0.635 mm) square terminals, 0.180" (4.57 mm) nominal terminal length x 0.200" (5.08 mm) nominal terminal row spacing contact spacing: 0.100" (2.54 mm) center to center contact terminal row spacing: standard - 0.200" (5.08 mm) nominal. right angle - 0.200" (5.08 mm) nominal and 0.150" (3.81 mm) nominal card thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm) card slot depth: 0.300" (7.62 mm) connector polarization: between contact polarization key(s) are located to the right of the contact position(s) designated note ? high temperature burn-in, edgeboard connectors, with 0.100" (2.54 mm) center to center are on www.vishay.com/doc?36006 mounting variations in inches (millimeters) terminal variations in inches (millimeters) type a b 1r 0.150 (3.81) 0.120 0.030 (3.05 0.762) 2r 0.200 (5.08) 0.120 0.030 (3.05 0.762) 3r 0.150 (3.81) 0.180 0.030 (4.57 0.762) 4r 0.200 (5.08) 0.180 0.030 (4.57 0.762) type ?x? clearance hole raised mountin g flan g e 0.060 (1.52) ref. 0.250 (6.35) 0.610 (15.49) ref. 0.430 (10.92) 0.125 (3.17) dia. type ?xf? clearance hole flush mountin g flan g e 0.060 (1.52) ref. 0.250 (6.35) 0.610 (15.49) ref. 0.125 (3.17) dia. type ?xs? ri g ht an g le mountin g flan g e 0.060 (1.52) ref. 0.610 (15.49) ref. 0.250 (6.35) 0.125 (3.17) 0.125 (3.17) dia. 0.430 (10.92) type ?xfs? ri g ht an g le mountin g flan g e 0.060 (1.52) ref. 0.125 (3.17) 0.125 (3.17) dia. 0.250 (6.35) 0.610 (15.49) ref. type ?w? no mountin g flan g e 0.060 (1.52) ref. 0.610 (15.49) ref. 0.430 (10.92) 0.1 8 0 (4.57) type ?yf? threaded insert flush mountin g flan g e 0.060 (1.52) ref. 0.250 (6.35) 0.610 (15.49) ref. 4-40 unc-2b type ?y? threaded insert raised mountin g flan g e 0.060 (1.52) ref. 0.250 (6.35) 0.610 (15.49) ref. 0.430 (10.92) 4-40 unc-2b 0.570 (14.4 8 ) 0.200 (5.0 8 ) type ?k? wire wrap?, standard 0.025 (0.635) square terminals type ?c? and ?d? solder dip, standard 0.025 (0.635) square terminals 0.200 (5.0 8 ) ?c? = 0.175 (4.44) ? d ?= 0.115 (2.92) to fit 0.050 0.002 (1.27 0.051) dia. eyelet type ?1r?, ?2r?, ?3r? and ?4r? ri g ht an g le 0.025 (0.635) square terminals b a 0.590 (14.99)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
